BECKHOFF Servo Drives AX5172-0000-0200

BECKHOFF Servo Drives AX5172-0000-0200

BECKHOFF Servo Drives AX5172-0000-0200 is serial from AX5000. AX5000 amplifiers are available in three sizes with rated currents of 60 A, 72 A, 90 A, 110 A and 143 A, 170 A. The controllers are designed for 3-phase operation at 400 to 480 V AC and deliver 1.5…2 times the rated current for 3 seconds. The versions up to 72 A feature integrated mains fi lters for compliance with EN 61800-3 requirements. The connection of an external ballast resistor is also possible. The EtherCAT connection to the PC-based control technology enables optimum utilisation of available resources. The AX5000 is very flexible with regard to the motors that can be connected: different motor sizes and types such as synchronous, linear, torque and asynchronous motors can be connected without additional measures. The multi-feedback interface supports all common standards. The AX5000 was developed specific cally for the EtherCAT realtime

Features AX5000

• high-speed EtherCAT system communication
• available in three sizes
• rated currents: 60 A, 72 A, 90 A, 110 A, 143 A, 170 A
• Supply voltage: 3 x 400…480 V AC ±10 %; the ratings are reduced by 10 % when connecting 480 V AC.
• multi-feedback interface
• fl exible motor type selection
• scalable wide range motor current measurement
• high-speed capture inputs
• diagnostic and parameter display
• integrated mains filters up to 72 A rated current, Cat. C3 according to EN 61800-3
• optional safety functions: protection against inadvertent restart of the drive axis (STO/SS1), intelligent TwinSAFE safety functions

Spesification BECKHOFF Servo Drives AX5172-0000-0200

• Function : servo drive for one drive axis
• Rated output current (1) : 72 A
• Rated supply voltage : 3 x 400…480 V AC ±10 %
• DC-Link voltage : max. 875 V DC
• Peak output current : 144 A
• Power loss : 1010 W
• Harware Version : 2.0
• Firmware Version 2.06